Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Burlingame, CA
Gate access control repair in Burlingame typically costs $280-$680 for keypad or card-reader troubleshooting, and $420-$1,200 for full video intercom replacement, with most service calls completed same-day. The marine-layer fog and salt-laden air off San Francisco Bay corrode circuit boards and contacts faster here than inland, so Burlingame access control calls often involve moisture damage that inland technicians rarely see. We dispatch background-checked, uniformed technicians from our San Francisco Bay Area office to Burlingame daily. Call (628) 270-2709 for a free estimate.
Why Burlingame Homes Are Different
Burlingame’s position directly on the bay shore means the marine layer rolls in most mornings, depositing salt moisture that accelerates rust on hinges, strike plates, and operator housings at a rate noticeably faster than in San Mateo or Redwood City. The city’s dense concentration of 1920s-1950s Spanish Colonial Revival and Tudor Revival homes retains original ornamental wrought iron gates and stone pilasters, so repair calls here skew toward corrosion damage and period-hardware matching rather than simple mechanical failures.
The residential streets rising from El Camino Real toward the Hillsborough border sit on meaningful grades. Many driveways slope steeply enough that swing gates require uphill-biased hinge geometry and gravity-compensating closers, a detail that causes premature wear when hardware is spec’d for flat lots. These conditions mean a technician working in Burlingame needs different parts and different experience than one working inland.
Our Main Burlingame Services
Homeowners in Burlingame call us most often for these three services:
Gate Repair in Burlingame
We repair swing gates, slide gates, and pedestrian gates throughout Burlingame’s older neighborhoods, addressing corrosion-damaged hinges, misaligned frames from hillside settling, and failed closers on steep driveways. Every repair includes a written price before work starts and a photo record of what we found. Gate Repair in Burlingame
Gate Installation in Burlingame
New gate installation in Burlingame requires hardware rated for salt-air exposure and, on hillside properties, geometry that compensates for grade. We measure slope, check pilaster condition, and deliver a written scope before ordering materials. Gate Installation in Burlingame
Gate Motor & Opener in Burlingame
Gate motor service in Burlingame means working with operators corroded by marine-layer moisture and limit switches thrown off by gate weight shifting on sloped tracks. We service nine brands and document every adjustment. Gate Motor & Opener in Burlingame
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Burlingame
Access control in Burlingame means working with systems exposed to salt-laden marine air that corrodes keypad contacts, card-reader terminals, and video intercom circuit boards faster than in inland Peninsula cities. Many of the 1920s-1950s homes here still have original wrought iron pedestrian gates with early retrofit intercoms, so we frequently match new access hardware to existing ornamental frames without damaging period metalwork. Gate Access Control systems in this environment need sealed components and regular inspection of connections.
Keypad Entry
Signs you need it
Buttons stick or fail to register, the housing shows white corrosion around the seam, or the gate opens intermittently after code entry.
What it costs in Burlingame
Keypad repair runs $180-$340; full replacement with a marine-rated unit runs $280-$550.
How we do it
We test voltage at the keypad terminal, photograph corrosion levels, install an IP65-rated replacement if needed, and record the new code in your job file.
Video Intercom
Signs you need it
Screen flickers or goes dark, audio cuts out, or the camera housing shows moisture inside the lens.
What it costs in Burlingame
Intercom repair runs $220-$420; full replacement with a sealed system runs $420-$1,200.
How we do it
We test signal path and power, document moisture intrusion with photos, install a gasket-sealed replacement, and verify night-vision clarity before leaving.
What Gate Access Control Costs in Burlingame
| Item | Typical range in Burlingame |
|---|---|
| Keypad repair | $180-$340 |
| Keypad replacement (marine-rated) | $280-$550 |
| Video intercom repair | $220-$420 |
| Video intercom replacement | $420-$1,200 |
Can salt air really destroy my gate keypad?
Yes. The marine layer in Burlingame deposits salt that corrodes keypad contacts and circuit boards, often within 3-5 years of installation. We specify IP65-rated or higher replacements to slow this. Call (628) 270-2709 for a free inspection.
Will a new intercom match my existing gate hardware?
We mount new intercoms to existing ornamental frames using custom brackets that avoid drilling into period wrought iron, preserving the original metalwork while adding modern function.
Gate Parts & Welding in Burlingame
Welding and parts replacement in Burlingame means fabricating hinges and brackets that withstand salt-air corrosion and compensating for gate frames stressed by hillside settling and gravity on sloped driveways. The original wrought iron on 1920s-1950s homes here often cannot be matched with off-the-shelf parts, so custom fabrication is routine. Gate Parts & Welding work in Burlingame requires a mobile welder who carries marine-grade materials.
Hinge Replacement
Signs you need it
The gate sags, binds, or scrapes the ground, or the hinge pin shows rust streaks and play.
What it costs in Burlingame
Standard hinge replacement runs $140-$280; custom-fabricated uphill-biased hinges for sloped driveways run $220-$480.
How we do it
We measure gate weight and slope angle, fabricate or source corrosion-resistant replacement hinges, set proper pivot geometry, and photograph the finished alignment.
Custom Welding
Signs you need it
The frame has cracked at a weld, decorative scrollwork has broken away, or a previous repair has failed.
What it costs in Burlingame
On-site welding repair runs $180-$360; full section fabrication and replacement runs $320-$680.
How we do it
We clean the fracture, match the original metal alloy, weld with marine-compatible rod, grind flush, and apply a rust-inhibiting primer before painting to match.
What Gate Parts & Welding Costs in Burlingame
| Item | Typical range in Burlingame |
|---|---|
| Standard hinge replacement | $140-$280 |
| Custom uphill-biased hinge | $220-$480 |
| On-site welding repair | $180-$360 |
| Section fabrication and replacement | $320-$680 |
Can you match my 1930s wrought iron gate?
We fabricate replacement scrolls and pickets from matching steel stock, then finish with a rust-inhibiting primer suitable for Burlingame’s salt-air exposure.
Do I need to remove my gate for welding?
Most repairs are completed on-site with our mobile welding rig; we only remove the gate if the frame requires bench welding for structural cracks.
Brands We Service in Burlingame
We stock parts and service nine automation brands in Burlingame: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our technicians carry common Elite and Mighty Mule control boards and FAAC limit switches locally, so most brand-specific repairs do not wait for shipping. our brands
Pricing for Gate Repair in Burlingame, CA
| Service | Typical range in Burlingame |
|---|---|
| Keypad repair | $180-$340 |
| Keypad replacement (marine-rated) | $280-$550 |
| Video intercom repair | $220-$420 |
| Video intercom replacement | $420-$1,200 |
| Standard hinge replacement | $140-$280 |
| Custom uphill-biased hinge | $220-$480 |
| On-site welding repair | $180-$360 |
| Section fabrication and replacement | $320-$680 |
Prices in Burlingame run higher than inland Peninsula markets when custom fabrication is needed to match period wrought iron or when hillside geometry requires specialized hardware. Every job receives a written, itemized price before any work starts under Haven Standard Clause 1.
Neighborhoods We Serve in Burlingame
We service residential and light commercial gates across Burlingame, with technicians typically arriving within scheduled windows coordinated from our San Francisco Bay Area office. Response times are consistent across the city.
- Easton Addition
- Burlingame Hills
- Burlingame Village
- Ray Park
- Lyon Hoag
Service Area - Cities Near Burlingame
Our crews work the central Peninsula corridor daily, with regular calls in San Mateo, CA to the north, Redwood City, CA to the south, and Atherton, CA and Menlo Park, CA to the west. Dispatch is coordinated from our San Francisco Bay Area office; we do not maintain separate satellite locations.
Serving Burlingame, CA - Our Local Coverage Area
We’re based in the Burlingame area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Burlingame
Yes. The marine layer here requires quarterly inspection of electrical connections and more frequent lubrication of hinges and rollers with corrosion-resistant grease. We document condition at each visit so you can track degradation.
Many Burlingame neighborhoods have design-review requirements for visible gate changes. We provide written scope and photo documentation you can submit to your HOA before work begins.
A live person answers our phone 24 hours a day. For stuck-open gates in Burlingame, we prioritize same-day dispatch and will give you a technician’s name and photo before arrival.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burlingame Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B.